เรามุ่งมั่นในการให้บริการแบบส่วนบุคคล และบริการแก่ลูกค้า ในระดับที่สูงสุดที่เป็นไปได้
- Denafrips Ares II DAC Configuration Guide
- Denafrips Pontus II DAC Configuration Guide
- Denafrips Gaia DDC & Terminator-Plus DAC Configuration Guide
[/fancy-ul][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”macOS Setup Guide”]
[divider line_type=”No Line” custom_height=”30″][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”Windows Setup Guide”][divider line_type=”No Line” custom_height=”30″][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”USB Driver”][fancy-ul icon_type=”standard_dash” color=”Accent-Color” alignment=”left” spacing=”default”][/fancy-ul][divider line_type=”No Line” custom_height=”30″][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”Owner’s Manuals”][fancy-ul icon_type=”standard_dash” color=”Accent-Color” alignment=”left” spacing=”default”]
- Denafrips Ares II DAC Owner’s Manual (EN)
- Denafrips Pontus II DAC Owner’s Manual (EN)
- Denafrips Venus II DAC Owner’s Manual (EN)
- Denafrips Terminator II DAC Owner’s Manual (EN)
- Denafrips Terminator-Plus DAC Owner’s Manual (EN)
[/fancy-ul][divider line_type=”No Line” custom_height=”30″][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”USB 2.0 Cable”]
Denafrips DAC USB receiver is powered by its internal regulated, low noise, low ripple, high speed linear power supply. However, it needs the USB cable to supply the +5vdc as a logic signal to trigger the internal power supply to the USB receiver. This design is intentional for best sound quality consideration. Please use a good quality USB 2.0 Type A/B cable less than or equal to <= 6ft/2m length for best results.
I²S has no industry standard. If you would like to use the I²S connection, the I²S pinout matching with the source (DDC/Transport/Streamer) and DAC has to be configured correctly. Mismatch of I²S pinout may result in static/noise output. The excessive noise output level may damage the loudspeakers/headphone drivers.
Suggestion For I²S Matching With The Source, i.e. DDC/Transport/Streamer
- Connect the I²S cable (good quality HDMI cable <3ft/1m)
- Turn down the volume (audible, minimal)
- Play a familiar music (PCM first, followed by DSD)
- Run through the I²S setting of the DAC, 000-111
- One of the modes should match with the source for both PCM and DSD playback.
It’s recommended to go through the Audio Tone Test to make sure the L/R channel, in phase/out of phase correctness.
Warning
Please note that the RJ45/HDMI ports of DENAFRIPS DDC/DAC are not typical network/multimedia RJ45/HDMI ports. They are purpose-built I²S ports. Please do not connect it to the typical multimedia HDMI port (i.e. Bluray player/TV etc) / Ethernet network.
