Denafrips Artemis Headphone Amp
Artemis is our flagship headphone amp, designed from the ground-up, equipped with the same technologies can be found in our flagship Terminator DAC – Smart Power Worldwide Voltage Auto Switching, Fast Recover Ultra-Low Noise Linear Power Supply, Low ESR Capacitors Bank.
Technical Highlights
- True Balanced In & Out
- Fast Recover, Ultra-Low Noise Linear Power Supply
- Metal Shielded 24-Steps Attenuator Volume Pot
- Pure Class-A Bias, Full Discrete Hand-Matched Premium Components
[/fancy-ul][divider line_type=”Full Width Line” line_thickness=”1″ divider_color=”default” custom_height=”20″][divider line_type=”No Line” custom_height=”10″]
Analog Input
- RCA, Input Impedance 14kΩ
- XLR1, XLR2, XLR3, Input Impedance 66kΩ
[/fancy-ul][divider line_type=”Full Width Line” line_thickness=”1″ divider_color=”default” custom_height=”20″][divider line_type=”No Line” custom_height=”10″]
Headphone Output
- 3mm Singled Ended
- XLR4 Balanced
- Dual XLR3 Balanced
[/fancy-ul][divider line_type=”Full Width Line” line_thickness=”1″ divider_color=”default” custom_height=”20″][divider line_type=”No Line” custom_height=”10″]
Maximum Output Power
- 32Ω, 4W RMS
- 50Ω, 3.28W RMS
- 300Ω, 800mW RMS
- 600Ω, 400mW RMS
[/fancy-ul][divider line_type=”Full Width Line” line_thickness=”1″ divider_color=”default” custom_height=”20″][divider line_type=”No Line” custom_height=”10″]
Frequency Response
10-80KHz (-1.1dB)
THD+N
0.0014%
Output Impedance
10Ω
S/N Ratio
121dB A-Weighted
Dynamic Range
>112dB
AC Power Requirement
100-240VAC, 50/60Hz (Worldwide Voltage)
Power Consumption
≤27W Operational, 0.3W Idling
Dimensions
320 x 330 x 70 mm
Package Dimensions
475 x 470 x 145 mm
Package Contents
Headphone Amp only. No power cord & remote control.
Weight
8 Kg
Color
Black/Silver
การรับประกันสินค้า
36 Months
Owner’s Manual
Owner’s Manual (EN)
USB Driver
USB Driver
For more information please visit our support page.
Related Products
The Denafrips Hades Preamp is a fully discrete, true balanced, class A line stage. It uses advanced microprocessor controlled relay based 60 stepped attenuator. The precision matched through hole resistor yielded perfect channel balance, delivering ultra low distortion, low noise, neutral sound reproduction.
The Ares DAC is a 24Bit/1536KHz, native DSD1024, discrete resistor ladder Digital To Analog Converter, also known as R-2R DAC.
The architecture uses the most primitive R-2R DAC technology, it is probably the most suitable architecture to reproduce music. Despite the test results of various measurements and parameters of the conventional R-2R DAC are usually not as good as the mainstream integrated DAC chip, but the sound of R-2R DAC, is often filled with emotion, comfort, high fidelity, transparency, and additive musicality that most of the common mainstream integrated DAC chip cannot match.