[nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”Setup”]
[divider line_type=”No Line” custom_height=”30″][nectar_animated_title heading_tag=”h6″ style=”color-strip-reveal” color=”Extra-Color-1″ text=”Denafrips Gaia Clock Sync”]
- Press Setup button once (enter setting mode)
- Press OPT button twice
- CLOCK light should be on/off as you press the OPT button momentarily
- CLOCK light on = enable clock in
- To confirm the setting, press Setup button once
-
- Press Mute button to engage mute/setting mode
- Press Input- button momentarily multiple times. You will see the LED light up in the following sequence as you press/release the Input button
– COAX (No clock output)
– AES1 (44.1K/48K)
– AES2 (24/25Mhz) <- for Soundaware
– OPT (45/49Mhz) <- for GAIA
– I2S-A (Clock out disable, note that CLOCK LED will be off too)
- Select I²S Input
- Press the Mute button once to enter configuration mode
- Press the Phase button momentarily, 1X 2X 4X will turn on/off in a fixed pattern to denote binary 000-111
- Wait for 10s
- DAC back in operational mode
- Connect the I²S cable
- Turn down the volume (minimal)
- Play a familiar music (PCM first, followed by DSD)
- Run through the I²S setting of the DAC, 000-111
- One of the modes should match with the source for both PCM and DSD playback.
It’s recommended to go through the Audio Tone Test to make sure the L/R channel, in phase/out of phase correctness.
